Waves and Fans Crochet Bedspread & Pillow Set Pattern

Introduction

Transform your bedroom with this eye-catching Waves and Fans Crochet Bedspread & Pillow Set. This unique crochet project features bold, curving waves in vibrant royal blue alternating with intricate lacy fans in a delicate light blue. The overall effect is both dynamic and elegant, lending a coastal or Mediterranean vibe to your decor. The texture is a delightful mix of solid and openwork crochet, creating extra warmth and visual interest without feeling heavy.

The main bedspread commands attention with its undulating rows, each composed of lacy fan motifs bordered by deep wavy ridges. Matching pillow covers echo the same motif arrangement, bringing coordination and polish. This set is perfect for adding a handmade, luxurious touch to your bedroom, guestroom, or even a chic beach house. Whether draped over a bed or as a statement throw, this project highlights the magic of marrying bold structure with delicate detail, giving crocheters a memorable, rewarding experience.

Project Overview

This pattern is constructed by joining repeating fan motifs in rows, separated by bold wave stripes. Each fan motif is worked separately, then joined as you go or with a tapestry needle. The solid wave stripes are crocheted directly onto the fan rows, creating a seamless and sturdy join. The pillows are made using smaller repeats of the same motif and wave combination. A scalloped border is added at the end for a finished, elegant edge.

Skill Level

Intermediate. While most stitches are basic, this project involves joining motifs, changing colors, and creating textured and lacy effects. Some experience in motif construction and color changes is recommended, though the pattern is broken down step by step for clarity.

Materials

Yarn: DK weight (light worsted, category 3) cotton or cotton-blend yarn is recommended for durability and stitch definition.
- Light Blue: Approximately 1800g for a queen-sized bedspread, 300g for two pillow covers.
- Royal Blue: Approximately 900g for a queen-sized bedspread, 150g for two pillow covers.
Crochet Hook: US size G/6 (4.0mm) or size needed for gauge.
Tapestry needle for joining and weaving in ends.
Scissors.
Stitch markers to mark joins and motif centers.
Optional: Blocking mats and pins.

Finished Size

Bedspread measures approximately 220 cm x 200 cm (87 in x 79 in), suitable for a queen-sized bed, with some overhang. Each pillow cover fits a 45 cm x 45 cm (18 in x 18 in) pillow insert. Adjust the finished size by adding or subtracting motifs, or by altering the number of wave repeats per row or column.

Gauge

One completed fan motif (unblocked) should measure approximately 18 cm (7 in) wide and 10 cm (4 in) high across the widest point. A row of three motifs joined with two wave stripes should measure about 54 cm (21 in) wide. Adjust hook size as needed to match gauge. Remember, slight gauge changes affect finished size significantly in motif-based projects.

Stitches and Abbreviations

ch: chain
sl st: slip stitch
sc: single crochet
hdc: half double crochet
dc: double crochet
tr: treble crochet
MR: magic ring
inc: increase (2 sts in same stitch)
dec: decrease (2 together)
sp: space
st(s): stitch(es)

Pattern Notes

This project is worked in joined motifs and constructed in rows. Chains at the start of rows count as stitches unless stated. The fan motifs are made first in light blue, with final join rounds worked as you go or with a tapestry needle. The wavy stripes are crocheted directly onto the edges of joined motifs in royal blue in continuous rows, or can be made separately and sewn if preferred. Color changes are made at the edges of motifs; carry unused yarns up the side if possible to minimize ends. Turn work only where instructed; use stitch markers to keep track of joins. Block finished pieces gently for the best drape and motif definition.

Crochet Pattern Instructions

Fan Motif (Light Blue)

MR, ch 3 (counts as dc), work 11 dc in ring. Tighten ring, sl st in beginning ch-3 to join. (12 dc)
Ch 3, dc in same st, 2 dc in each st around. Sl st to join. (24 dc)
Ch 4 (counts as tr), tr in next st, ch 2, *tr in next 2 sts, ch 2; repeat from * around. Sl st to join. (12 ch-2 sps, 24 tr)
Sl st into first ch-2 sp, ch 4 (counts as tr), work (2 tr, ch 2, 2 tr) in same sp (fan cluster), sc in next ch-2 sp, *(2 tr, ch 2, 2 tr) in next ch-2 sp, sc in next ch-2 sp; repeat from * around. Join. (6 fan clusters, 6 sc)
Sl st into first ch-2 sp of fan cluster, ch 3, work (4 dc, ch 2, 4 dc) in same sp, sc in next sc, repeat around, sl st to join. Fasten off. (96 dc, 6 ch-2 sps, 6 sc)

Joining Fan Motifs

Work the first row of motifs (e.g., 8 motifs across for a queen size) all the way across, joining on the last round through ch-2 spaces as you go, or wait and use a whipstitch and tapestry needle to sew motifs edge-to-edge through ch-2 sps corresponding to each fan “petal”.
Start second row of motifs, joining along one edge to the row above. Continue until you have the desired number of rows (e.g., 12 rows for full size).

Wave Stripe (Royal Blue)

Attach royal blue yarn at side of joined motifs. Ch 3 (counts as dc), and evenly dc across the edge, aiming for 3 dc per motif and 1 dc in each motif join along the edge. Adjust so the count is a multiple of 12 (for the repeat).
Ch 3, turn. Work as follows across: *dc2tog (over next 2 sts), dc in each of next 4 sts, 2 dc in next st, 2 dc in next st, dc in next 4 sts, dc2tog; repeat from * across. (If needed, adjust at ends.)
Repeat previous row 2 more times for thick, bold ridge. Fasten off and weave in ends. (To make softer waves, substitute hdc instead of dc on the final repeat.)

Bedspread Construction

Alternate rows of fan motifs and wave stripes, always ending with a wave stripe for visual balance.
Repeat until bedspread measures desired length.

Pillow Covers

Make enough motifs to form a square of about 45x45cm (usually 3×3 motifs). Join in same fashion.
Add wave stripes along one side for the front panel. Repeat for the second pillow.
For back panel, use plain royal blue rows of sc or dc to match front size (or make both sides motif-and-wave for a fully reversible look).
Join panels on three sides with sc in light blue or royal blue. Insert pillow and seam final side with slip stitches or a decorative border (like crab stitch or shell edging).

Scalloped Border

With light blue, join yarn anywhere along bedspread’s edge. Ch 1, sc evenly around the entire bedspread, making 3 sc in each corner. Sl st to join.
Ch 3 (counts as dc), *skip 1 st, 5 dc in next st, skip 1 st, sc in next st; repeat from * around. Sl st to join, fasten off. Weave in ends.

Assembly and Finishing

Carefully weave in all loose ends with a tapestry needle, taking extra care in high-stress areas such as motif joins and pillow edges. If you’ve joined motifs with a whipstitch, keep joins loose for flexibility. Gently block your bedspread and pillow covers by soaking in cold water, carefully pressing out water with a towel, and pinning to shape on blocking mats. Leave to dry completely to achieve crisp definition of lace motifs and even edges. For pillows, ensure both front and back panels are evenly matched before final joining. Insert pillow forms before closing final seam. Add optional decorative buttons or closure to the back of pillow covers for easy removal and washing.

Customization Ideas

Swap out the light blue for white, cream, or a soft pastel for a fresh, airy look.
Try gradient yarns for the waves or fans, or alternate several colors for a more eclectic, mosaic effect.
For a warmer, heavier bedspread, use worsted weight acrylic or wool yarn and size up the hook accordingly.
This pattern makes an elegant tablecloth, a sofa throw, or a smaller baby blanket by varying motif count and size.
Use metallic or sparkly yarn for the wave sections for celebratory occasions.

Troubleshooting

If motifs curl: Try blocking after each motif, and ensure your chains are loose—tight chains in lace can cause puckering.
Uneven edges: Make sure you’re not skipping stitches at joins and that you consistently line up ch-2 spaces when sewing motifs together.
If the piece is too large or too small: Re-check your gauge at the beginning and adjust your hook size accordingly. A slight variance in motif size will be exaggerated across an entire bedspread.
Loose color changes: At the end of every color change row, pull the new color snugly before fastening off and weave securely.
Uneven tension: Practice a few motifs and waves before starting the full project to settle into a steady rhythm.

Care Instructions

Wash bedspread and pillow covers gently in cold water on a delicate cycle or handwash for best results. Use mild detergent. Lay flat to dry on a towel or blocking board; reshape motifs as you go. Do not iron directly—use a pressing cloth if needed. Store folded in a dry, cool spot to maintain shape.

Final Notes

Count stitches at the end of every motif and wave row for consistency. Don’t be afraid to adjust tension or hook size to suit your hand or yarn. Use the provided photo as a visual reference for color placement and motif orientation, and enjoy every step of creating this unique, intricate crochet masterpiece!