Introduction
If you’re seeking to crochet a showstopping centerpiece for your bedroom, this modern crochet bedspread is the perfect project. The bedspread in this pattern features a visually striking design made from wide, textured stripes alternating with openwork geometric lattice panels, all in a beautiful, uniform pale gray color. The symmetric repetition of these panels and the high, plush stitch definition add a luxurious feel, making it both an eye-catching and inviting addition to your room.
The geometric lattice motif gives the piece an airy elegance, while the wide solid bands provide structure and warmth. This bedspread doesn’t just look sophisticated; it’s also a true pleasure to touch, with soft, thick yarn and defined stitch patterns. Drape it over your bed for a modern, cozy upgrade, or fold it at the foot for a designer touch. If you’re ready for a crochet adventure that combines bold style with practical comfort, this is the project for you.
Project Overview
This crochet bedspread is constructed from alternating wide textured stripes (using half double crochet or similar dense stitches) and openwork lattice motifs (made by joining small flower-like motifs or worked in an interlocking mesh). The stripes and motifs are worked in long strips, which are then joined side by side to form the full bedspread. Matching pillow panels can be made using the same methods, altering length to fit pillow size. The project is worked primarily in rows, with joining and finishing at the end.
Skill Level
Intermediate. This pattern is best suited for confident crocheters familiar with basic and intermediate stitches, as well as techniques for joining motifs and handling larger projects. Patience and attention to stitch counts are important for a neat, professional finish.
Materials
- Yarn: Approx. 2500-3000 yards (2285-2740 m) of bulky weight (category 5) yarn in a soft acrylic/cotton blend or 100% cotton for drape and stitch definition. Shown in solid pale gray.
- Crochet Hook: 7 mm (US K-10.5) or size needed to achieve gauge.
- Tapestry Needle: For weaving in ends and joining pieces.
- Stitch Markers: Useful for marking beginnings/ends of rows and motif placement.
- Scissors
- Measuring Tape
- Blocking Mats & Pins: Optional, but recommended for even finishing.
Adjust yarn quantity for larger or smaller beds. Use similar-weight yarn if substituting.
Finished Size
The finished bedspread is designed for a standard queen-size bed: approximately 80 inches (203 cm) wide by 88 inches (224 cm) long. You can adjust the width by increasing or decreasing the number of stripes and motif panels, and the length by working more or fewer rows per panel. To fit twin, full, or king, modify the number and width of your panels accordingly.
Gauge
In solid stripe pattern: 10 stitches x 8 rows = 4 x 4 inches (10 x 10 cm) in half double crochet, lightly blocked. In the geometric lattice motif, one “flower window” motif measures approx. 2.5 inches (6.5 cm) across. Check gauge carefully; a looser gauge will yield a larger bedspread and use more yarn.
Stitches and Abbreviations
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- sp: space
- st(s): stitch(es)
- rep: repeat
- RS: right side
- WS: wrong side
Pattern Notes
- Ch 2 at the beginning of a hdc row does not count as a stitch unless otherwise noted.
- Stripes and lattices are made as separate panels (strips), then joined together.
- Neatly change colors (if using) at the end of a row with a yarn-over and pull through with new color.
- All strips are joined with RS facing for consistent texture.
- Use stitch markers to maintain clean edges, especially for long panels.
- Blocking the lattice sections before joining gives a polished, uniform look.
Crochet Pattern Instructions
Main Panels Breakdown
- Textured Stripe Panel (Make 4-5, or as needed for your desired width):
- Foundation: Ch 180 for the length of the bedspread (approx. 88 inches / 224 cm; add or subtract chs in multiples of 2 for desired length).
- Row 1 (RS): Hdc in 3rd ch from hook and in each ch across. Turn. (178 hdc)
- Row 2: Ch 2; hdc in each st across. Turn. (178 hdc)
- Rep Row 2 for a total of 8 rows, or until strip measures about 6 inches (15 cm) wide.
- Fasten off, weave in ends.
- Geometric Lattice Motif Panel (Make 4, to alternate with stripes):
- This panel is made up of joined round flower window motifs. Each is made individually and joined as you go in either rows or columns. Panel should be same length as stripe panels.
Flower Lattice Motif (Make enough for 1 panel as described below)
- Round 1: MR (magic ring), ch 3 (counts as dc), 11 dc in ring. Join to top of ch 3 with sl st. (12 dc)
- Round 2: Ch 5 (counts as tr, ch 1), *tr in next st, ch 1; rep from * around. Join with sl st to 4th ch of starting ch 5. (12 tr, 12 ch-1 sps)
- Round 3: Sl st into ch-1 sp, ch 1, (sc, ch 4, sc) in each ch-1 sp around. Join with sl st. (12 sc, 12 ch-4 loops)
- Joining Motifs:** When beginning subsequent motifs, join on final round by working (sc, ch 2, sl st to corresponding ch space of adjacent motif, ch 2, sc) instead of (sc, ch 4, sc) at the join points.
- For each panel, join motifs side by side and lengthwise to reach 88 inches; arrange 8 motifs long by 4 wide for each strip (adjust as needed for length and width). Fasten off, weave in ends of all motifs after joining.
Assembling the Panels
- Lay out your panels alternately: stripe, lattice, stripe, lattice, etc., until the desired width is achieved (usually 7-9 panels total).
- With RS facing, whip stitch or single crochet through both panel edges to join, keeping strips flat and edges aligned. Work slowly, using locking stitch markers to match up rows or motifs as you work.
Pillow Panels (Optional)
- To create matching pillow covers, use the same motif for the front panel, joining enough motifs to fit a standard pillow measurement (20 x 26 inches (51 x 66 cm) for standard pillows). Make a single stripe panel to match the bedspread for the reverse, or crochet two panels (one motif, one stripe) and sew together, leaving an opening for the insert.
Assembly and Finishing
- Joining Panels: Take time to arrange all completed strips on a flat surface to choose your preferred layout. Join with whip stitch or single crochet, maintaining even tension and matching edges precisely.
- Weaving in Ends: Use a tapestry needle to neatly weave in all yarn tails along seams and within motif joins for a polished look.
- Blocking: For best results, block the bedspread after assembly. Use blocking mats and pins to gently stretch the lattice motifs open and ensure the striped panels remain straight. Lightly steam or wet-block, shaping as needed, and let dry flat.
- Pillow Assembly (if making): Place finished front and back panels RS together, seam three sides with whip stitch or sc, insert pillow form, then close final seam or add buttons/zippers as desired.
Customization Ideas
- Color: Try soft neutrals, pastels, or bold tones for a modern twist; alternate stripe and motif colors for extra contrast.
- Yarn Weight: Use lighter yarn for an airier, drapier bedspread or heavier yarn for added warmth and chunkiness.
- Alternative Uses: Crochet a single stripe-and-lattice set for a chic table runner, sofa throw, or decorative wall hanging.
- Embellishment: Add a simple shell or picot border or edge with fringe for a boho touch.
Troubleshooting
- Curling Edges: Ensure even tension in both stripe and motif panels. Block panels before joining if curling is severe.
- Uneven Edges: Count stitches/rows at ends of panels and use stitch markers every 10 rows as a checkpoint.
- Piece Too Large/Small: Double-check gauge and adjust hook size if needed before making many panels. To resize, add or subtract rows, motifs, or full panels.
- Loose Joins or Gaps: Weave motif join stitches snugly and avoid over-stretching when joining panels.
- Inconsistent Tension/Appearance: Take breaks to keep hands relaxed; block final piece for consistent look. Mistakes in motif joining can be corrected by carefully unpicking and rejoining as needed.
Care Instructions
Hand wash or machine wash gently in cold water with mild detergent. Lay flat to dry to preserve shape, especially the lattice motifs. Avoid wringing or tumble drying, as this may stretch or distort textured stitches or joins. Store folded in a dry, airy location, and protect from snags.
Final Notes
Take your time to count stitches and rows, adjust working tension if panels differ in width, and use the provided photo as a visual guide for motif and stripe arrangement. A careful and patient approach will yield a professional-quality, beautiful modern crochet bedspread you’ll treasure for years to come!
