Crochet Bunny Motif Blanket Pattern – Charming Spring Bedspread

Introduction

If you\’re looking for a whimsical and cheerful project to brighten up a bedroom or nursery, this crochet bunny motif blanket is the perfect choice. This blanket, bursting with the charm of rows upon rows of sweet bunny faces in sunshine yellow and creamy white, creates a playful yet soothing atmosphere. Each motif features two perky ears, simple embroidered faces, and is joined in a dainty open grid for a delightful lacy effect. The result is a soft, cozy, and lightweight throw that adds a delightful pop of personality to any space.

The visually distinct bunny shapes, contrasted between yellow and white, make this blanket especially appealing for springtime, Easter, or year-round comfort. Whether you lay it on a child\’s bed, gift it to a new baby, or use it as an accent in a guest room, the adorable and approachable motifs are sure to draw smiles. Creating each bunny is quick and fun, and joining them together builds a sense of accomplishment as the blanket grows. This is more than just a blanket—it’s a collection of hand-made memories just waiting to be snuggled under.

Project Overview

This bunny blanket is made up of individual bunny face motifs, each crocheted separately and then joined using a join-as-you-go (JAYGO) lace technique. The motifs alternate in two colors—creamy white and pastel yellow—to create a balanced, modern look. Each bunny motif features an oval face with two separate ear pieces that are sewn on, and simple embroidered faces for expression. Once all motifs are joined, the blanket is optionally finished with a delicate border to enhance the playful shapes and prevent curling.

Motifs: Bunny faces (2 colors)
Assembly: Join-as-you-go method
Extras: Simple facial embroidery; optional border

Skill Level

This pattern is best suited for advanced beginners to intermediate crocheters. Basic crochet stitches are used for the motifs, and simple sewing and embroidery techniques are needed for assembly and adding features. The join-as-you-go method is straightforward but requires attention to stitch placement.

Materials

Yarn: Worsted weight (category 4), cotton or cotton-blend recommended for softness and durability. Approx. 700g total: 350g white, 350g yellow.
Crochet Hook: 4.0 mm (G-6) or size for gauge
Tapestry Needle: For sewing ears, weaving ends, and embroidery
Embroidery Floss or DK yarn: Small amount in black or dark brown for bunny faces
Scissors
Stitch Markers: Optional, to mark motif corners and join points
Measuring Tape

Finished Size

The finished blanket in the image appears to be approximately 130 cm × 180 cm (51 in × 71 in), suitable for a twin or single bed. Each bunny motif measures about 12 cm × 15 cm (4.7 in × 5.9 in), including the ears. You can customize the size by adding or subtracting rows of motifs horizontally or vertically. Adjust yarn quantities proportionally for bigger or smaller blankets.

Gauge

With worsted weight yarn and a 4.0 mm hook, one finished bunny face motif (including ears) should measure approximately 12 cm × 15 cm (4.7 in × 5.9 in). In pattern: 12 sc stitches and 14 rows = 10 cm x 10 cm (4 in x 4 in) in single crochet. Adjust hook size if needed to achieve a consistent motif size.

Stitches and Abbreviations

ch – chain
sl st – slip stitch
sc – single crochet
hdc – half double crochet
dc – double crochet
inc – increase (two stitches in same stitch)
dec – decrease (single crochet two together)
MR – magic ring

Pattern Notes

All motifs are worked in joined rounds; do not turn work.
Chains at start of rounds do not count as stitches unless specified.
Use the invisible join for color changes and final joins for neatness.
Ears and face are separate; sew ears and embroider face after motif is finished.
Mark start of rounds if needed.
For the join-as-you-go section, motifs are joined on the last round by slip stitching into adjacent motif points.
Weave in all ends securely. Block motifs before joining for a neat finish.

Crochet Pattern Instructions

Bunny Face Motif Body

Round 1: With main color (white or yellow), MR, ch 2 (does not count as st), 12 dc in ring. Sl st to first dc to join. (12 sts)
Round 2: Ch 2, 2 dc in each st around. Sl st to first dc. (24 sts)
Round 3: Ch 1, *1 sc in next st, 2 sc in next st; repeat from * around. Sl st to first sc. (36 sts)
Round 4: Ch 1, 1 sc in each st around, sl st to first sc. (36 sts)
Round 5: Ch 1, sc in next 6 sts, hdc in next 6 sts, dc in next 12 sts, hdc in next 6 sts, sc in last 6 sts, sl st to first sc. (36 sts)
Round 6 (Shaping): Ch 1, sc in each sc and hdc, [2 sc in next dc, sc in next 2 dc] 4 times across the top of the oval, then sc in remaining sts. Sl st to join. (44 sts)

Bunny Ear (Make 2 per motif)

With matching color, ch 10.
Row 1: Sc in 2nd ch from hook, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in last 2 ch. (9 sts), ch 1, turn.
Row 2: Sc across, ch 1, turn. (9 sts)
Row 3: [sc2tog, sc in next 5, sc2tog] (7 sts)
Fasten off, leaving a long tail for sewing. Ears should measure approx. 6 cm (2.3 in) each.

Joining Ears to Face

With tapestry needle and yarn tail, sew ears securely to the top of the bunny head, spaced evenly (about 2–3 stitches apart). Make sure the curvature of the ears follows the facial contour.

Face Embroidery

Using dark brown or black yarn/floss, embroider two small eyes (French knots or small filled circles) approximately halfway down the face, spaced symmetrically.
Embroider a small ‘x’ for the mouth just below the eyes, using a few backstitches.

Join-As-You-Go (JAYGO) Motif Joining

Crochet desired number of bunny motifs (alternating colors as wanted).
Arrange motifs in rows and columns to visualize the blanket layout.
To join, work the last round of each motif as follows:
- When reaching an “ear” or face-side that touches an adjacent motif, join with slip stitch into corresponding stitch of finished motif instead of working that stitch.
- Continue joining all remaining motifs horizontally into strips, then join strips vertically, making sure motifs align and lie flat.
For lacy joins (as in image), after attaching each bunny face to its neighbor at three to four key points (cheeks, bottom, and between ears), ch 3 or ch 4 in between joint points to create airy connectors. Slip stitch to join on next motif, then continue chs and join to previous motif.

Optional Blanket Border

After all motifs are joined, work a simple border. Attach white or yellow yarn anywhere along the outer edge.
Round 1: Sc evenly around, placing 3 sc in each corner, sl st to first sc to join.
Round 2: (Optional) Work ch-3 picot: *sc in next 2 sts, ch 3, sl st in first ch (picot made), repeat from * around. Fasten off and weave in ends.

Assembly and Finishing

Once all motifs are assembled, lay the blanket flat and adjust motifs to even out open spaces and joins.
Sew any loose joints between motifs to ensure there are no large gaps or unstable areas, especially where four motifs meet.
Weave in all yarn tails securely on the wrong side of the blanket using a tapestry needle.
Gently hand wash or steam block (if cotton yarn) to encourage motifs and joins to settle flat and shapes to relax.
Optional: Pin the blanket to correct dimensions and let dry completely, smoothing all edges and joins for a polished, professional look.

Customization Ideas

Change up the color palette: try powder blue, pastel pink, mint, or soft grey for a different mood.
Mix and match pastel colors for a rainbow baby blanket.
Use a lighter weight yarn and smaller hook for a delicate baby blanket, or chunky yarn and a bigger hook for a squishier throw.
Make extra motifs for matching decor—bunny bunting, pillows, or wall hangings.
Use the bunny face motif as a coaster, hot pad, or applique on bags and jackets.

Troubleshooting

Bunny faces curling: Block the motifs before joining; if using mostly acrylic yarn, steam block with care.
Edges uneven: Use stitch markers to check spacing of motifs; add extra single crochets in border if needed to smooth points.
Blanket too large or small: Adjust the number and size of motifs, or change hook size to alter final blanket width and length.
Color joins are loose: When changing colors or joining, use the invisible join method and weave ends tightly on the reverse.
Facial embroidery not consistent: Mark eye and mouth positions lightly with a fabric pen before embroidering for even placement.
Tension inconsistent: Pause and adjust grip; blocking usually relaxes minor tension differences in finished motifs.

Care Instructions

Hand wash in cold or lukewarm water with mild detergent. Roll in a towel to remove excess water, then lay flat to dry and reshape. If using cotton yarn, occasional gentle machine washes on a delicate cycle, inside a mesh bag, are usually safe. Do not wring or tumble dry. Steam block occasionally to help the blanket keep its shape.

Final Notes

Count stitches at the end of each round of each motif for consistent sizing throughout. Adjust your tension if motifs are coming out too tight or loose. Let the blanket image be your visual guide—and enjoy creating an adorable heirloom piece sure to be treasured for years!